Diskey Architectural Signs

read moreBased in the Midwest, Diskey Architectural Signage Inc. manufactures a wide range of signage products used by a variety of industries and businesses. Diskey has manufactured all manner of signs for dozens of Fortune 500 companies, US Government agencies, universities, hospitals, libraries, office buildings and hotels throughout the United States. Our specialties include interior, exterior, standard, custom, brand new and refurbished, for new constructions or remodeling. Diskey is a full service provider with expertise in consulting, design, manufacturing, installation and ongoing support of nearly every variety of sign products imaginable.

read moreSince the creation of the Americans with Disabilities Act (ADA)-signed into law in 1990-Diskey has been one of the industry's leading manufacturers of ADA compliant signs. For more than 20 years, Diskey has manufactured a multitude of ADA compliant sign and we have determined that our current offering-combined with almost unlimited customization-offer you the most practical, cost effective signage options available. As technology evolves, more and more manufacturers are eliminating jobs, moving their business to the internet and offering only standard products available in standard colors.

read morePrecision cut-out aluminum or plastic letters are mechanically internally fastened to the finished sign panel. All fasteners are non-corrosive aluminum or stainless steel. Translucent or transparent face material must be used for lighted signs. Computer-generated pressure-sensitive vinyl (PSV) letters are accurately prespaced and applied to the finished sign panel. Letters are available in any of Diskey's standard, reflective, and translucent vinyl colors. When you require a monument sign that reflects your architecture and comes in under budget, look no further than Diskey Sign Company.

read moreINLAID signs are comprised of 1/8 solid color, modified, laser cut acrylic characters are pushed through a.080 back painted non-glare acrylic panel. This results in the required 1/32 letter and symbol height. The acrylic panel is then mounted to a 3mm thick PVC (or.118 acrylic) backer with double sided tape ready to install. Better-and cheaper-than photo polymer! After producing thousands of photo-polymer signs for more than 15 years, Diskey developed the ULTIMATE POLYMER sign. Because photo-polymer is etched using water, later exposure to water will ruin the sign after only a few minutes (we have also seen many failures with "exterior grade" photo-polymer" after exposure to the elements.)